Hayward Vari-Flo Valve SP0714T
[SP0714T]

Price:

Hayward Vari-Flo Valve SP0714T

OPTIONAL: A pipe tap boss is provided for use of a pressure gauge.
PLUMBING: Piping stops are provided. IMPORTANT: Do not overtighten pipe fittings. Proper fitting make-up is hand tight
plus one to 1-1/2 turns maximum. Always use Teflon pipe tape or Permatex No. 2 for connections to provide a good,living?
seal. Add extra sealant if male pipe fitting is undersized.
WINTERIZING: Drain and winterize filter and pump per manufacturers instructions. To drain water from Vari-Flo?depress and
rotate valve handle and place handle pointer on raised portion of index hubs at anyWinterposition.
SERVICING VALVE: If it becomes necessary to service or gain access to the key or valve seat gasket:
a. Set handle in Winter position.
b. Remove cover screws.
c. Lift cover and key assembly out.
RE-ASSEMBLY VALVE:
a. Wipe debris from cover O-ring.
b. Set handle in Winter position. Align notch on cover with tab on body. Press down to seat assembly.
c. Secure assembly to body with cover screws. Start screw thread in existing thread in body. Tighten cover screws evenly
and alternately. Do not overtighten.

FUNCTIONS OF VALVE POSITIONS
VALVE SETTING	FLOW DIRECTION THROUGH VALVE
FILTER	PUMP - TOP - THROUGH FILTER - BOTTOM - RETURN For normal filtration and vacuumingswimming pool through filter.
BACKWASH	PUMP - BOTTOM - THROUGH FILTER - TOP - WASTE For reversing flow for cleaning filter.
RINSE	PUMP - TOP - THROUGH FILTER - BOTTOM - WASTE For initial start-up cleaning, plus resetting filter bed after backwashing.
WASTE	PUMP - WASTE For vacuuming directly to waste, loweringswimming pool level/drainingswimming pool.
CLOSED	NO CIRCULATION PAST PUMP PORT For shutting off all flow to filter andswimming pool.
RECIRCULATE	PUMP - RETURN For bypassing filter, but circulatingswimming pool water. May be plumbed foroff-systempool water access. Ideal for Jet-Airfittings.
WINTER	VALVE NOT IN USE.