This product was added to our catalog on Saturday 22 December, 2012.
1 gal. Pool Water Instant Conditioner made by Natural Chemistry 07401
Instant Pool Water Conditioner protects your chlorine from the light of the sun. With a highly concentrated liquid formula it is easy to apply and safe for use with all sanitizers andswimming pool surfaces.
- fast acting liquid
- pool friendly pH of 8.0
- will not damageswimming pool surfaces or equipment
Dosage:
1 gallon (3.79L) increases CYA level to 32ppm per 10,000 gallons (38,000L)
Dosages for fresh water start up (no cya present): Divideswimming pool volume in gallons by
10,000 gallons to determine the number of gallons of Instant Pool Water Conditioner required
How to Apply:
1. SHAKE WELL
2. With circulation pump running pour Instant Pool Water Conditioner intoswimming pool skimmer
slowly OR pour directly intoswimming pool water, while walking around perimeter ofswimming pool brush
to speed absorption
3. Rinse container withswimming pool water and shake
4. Pour remaining rinse solution into skimmer orswimming pool
Maintenance:
1. Measure CYA level inswimming pool using cyanuric acid test or have it tested by a professional dealer
2. If CYA level is less than 30ppm, calculate gallons of Instant Pool Water Conditioner needed using the following
formula: (4oz/10,000 gallons= 1ppm increase of conditioner stabilizer level)
Tips:
Once entire contents of the bottle is used, add water to shake bottle- pour contents into skimmer
Features & Benefits:
Dissolves instantly
Pool friendly pH
Protects chlorine immediately
Will not harm any equipment orswimming pool surface
